DEPARTMENT OF ELECTRICAL POWER ENGINEERING

COLLEGE OF ENGINEERING

POWER ELECTRONICS

| Home | Topics | Summary of Topics | Examples | Test Your Understanding | Survey |
TOPICS COVERED

 

 

 

 

 

 

DC TO DC CONVERTER

•  Introduction

Buck (Step Down) Converter

•  Assumptions Made for Analysis of the Buck Converter

•  *Circuit Operation Switching Modes

•  Output Voltage Average

•  The Inductor Current Ripple

•  The Load and the Capacitor Current

•  Continuous Conduction Condition

•  The Capacitor Voltage Ripple

 

Boost (Step Up) Converter

•  Assumptions Made for Analysis of the Boost Converter

•  *Circuit Operation Switching Modes

•  Output Voltage Average

•  The Inductor Current Ripple

•  The Inductor Current

•  Continuous Conduction Condition

•  The Diode and Capacitor Currents

•  The Capacitor Voltage Ripple

Designing DC-DC Converters

•  Converter Design Consideration

 

 

 

 

 

 

 

PULSE WIDTH MODULATED INVERTERS

•  Introduction

•  Inverter Types

•  Basic Inverter

•  Performance Parameters

•  Fourier Series

•  Total Harmonic Distortion

Single Phase Inverter

•  Single Phase Half Bridge Inverter

•  Single Phase Full Bridge Inverter

•  Square-wave Inverter

•  Square-wave Inverter with RL Load

•  Pulse-Width Modulation (PWM) Control Strategy

•  Amplitude & Harmonics Control

•  Sinusoidal Pulse Width Modulation (SPWM)

•  PWM Definitions & Considerations

Bipolar Switching (Single Phase)

•  PWM Outputs (with animation)

•  PWM Harmonics

Unipolar Switching (Single Phase)

•  PWM Outputs

•  PWM Harmonics

Three Phase Inverter

•  Introduction

•  Switch State for Six Step Inverter

•  Six Step Inverter (continue)

•  Three Phase SPWM

 

| Home | Topics | Summary of Topics | Examples | Test Your Understanding | Survey |